When you own a home, business or apartment building, it will have plumbing problems occasionally that will require a repair. You may ignore leaking pipes and joints in a building, but if you do, then it can lead to secondary problems that include having mold growth, mildew odor and pest infestations. However, you may not understand all of the ways that you can cope with water leaks on your own until the Copem plumbers in Greeley arrive at your property.
Understanding how to fix the plumbing leaks in a building can prevent the secondary problems until the experts arrive with the proper equipment and parts to make a permanent repair. Here are the tips that you can use for repairing leaking joints and pipes until the professional plumbers arrive at your property.
Tip 1: Have the Plumbing Repair Supplies That You Need
It is a good idea to have some of the repair supplies that you might need for a plumbing leak before the problem begins. This means that you won’t need to dash to the home improvement store on a holiday or late at night to cope with the water leaks. Here are the supplies that you must have:
- Protective gloves
- Metal clamps
- Rubber or plastic patches
- Wood pieces
- Emery paper
- Cutting tools
- Plumbing flux
- Plastic or fabric sheets
- Protective goggles
- Absorbent towels
Tip 2: Turn Off the Water at the Main Valve
You must turn off the water in the building at the main valve to prevent additional water damage. This will also make it impossible to use the water that is required for all of the plumbing fixtures, including the toilets, bathtubs and sinks.
When you turn off the water at the main valve, it will also keep the water from flowing into a water heater. This can lead to intense water pressure, so you should turn down the heat level on the water heater. In addition, turn on one faucet that is located near to the main valve to relieve the pressure that occurs in the water pipes.
Tip 3: Protecting the Floor and Wall
After removing any items from the area near the leaking pipe and connector, protect the baseboard and wall with a fabric or plastic sheet. This will prevent water damage to the drywall, paint, floor tiles or carpet in addition to capturing any debris, making it easier to clean the area after you fix the leaky pipe and joints.
Tip 4: Cutting Away the Old Pipe
Wear your protective goggles and gloves while you use a cutting tool to remove the old section of pipe. Try to protect the connecting joint, but if it is also degraded, then you will need to remove it too. Use caution to avoid damaging the wooden cabinets or other surfaces that are near the leaking pipe. Have a bucket nearby along with absorbent fabric towels to capture the water that may drip as you cut away the old pipe.
Tip 5: Cleaning the Connecting Joints
You can often repair the existing connecting joint to prevent leaks by using emery paper to remove the mineral sediments or rusty substances on the device. However, if the connecting joint is beyond repair, then you can place a new one on the pipe next to it before installing a new pipe to replace the leaking one. Using special plumbing putty on the connecting joint and pipe can help with sealing the device to prevent additional water leaks.
Tip 6: Temporary Repairs Until the Plumbers Arrive
If you can’t remove the pipe or connecting joint, then you can patch the items temporarily until the plumbers arrive. This involves drying the pipe or connecting joint with a fabric towel before applying an adhesive plastic or rubber patch to the pipe.
Use a metal clamp to hold the patch in place, and if you need to cover a larger hole, then place a piece of wood over the hole before using the clamp. It is a good idea to leave a bucket and absorbent towels underneath this temporary repair until the plumbers complete a permanent repair.